Powerful 230-Volt HEPA Air Purification System for Large Commercial and Industrial Disaster Restoration Projects
With peak delivered airflow of up to 4,000 cfm, the PAS5000 Portable Air Scrubber from Abatement Technologies® is designed to handle the largest and toughest disaster restoration jobs you can throw at it. Its five-horsepower, 230-volt single-phase motor and multi-inlet blower typically enable the PAS5000 to maintain 6 Air Changes per Hour (ACH) in spaces as large as 35,000 to 40,000 ft³.
The dual HEPA filters are individually tested and certified to ensure that the PAS5000 can provide 99.97% or higher efficiency at rated airflow. The upright cabinet mounted on four extra heavy-duty, 5” diameter casters with foot brakes enhances PAS5000 mobility and allows it to fit through standard doorways. The PAS5000 Portable Air Scrubber is NRTL-certified to operate safely on a 220-240 volt/60 Hz single phase power supply.
Hefty features that make the PAS 5000 uniquely qualified for large spaces include:
Power Plus - Strong, five-horsepower single-phase motor delivers up to 4,000 cfm of peak airflow yet draws 21 amps or less on a 230 V/30 amp/60 Hz electric supply
Durability - Tough, galvanized 20 gauge stainless steel cabinet with strong and secure aircraft-type solid rivet fasteners
Mobility - Narrow, 26.5”-wide upright cabinet with four extra heavy-duty, 5” diameter by 2”-wide casters (2 fixed and 2 locking swivels)
Odor Adsorption - VAPOR-LOCK® high-capacity granular carbon pre-filters capture gasses and odors. Optional pre-filters are also available
HEPA Efficiency - Dual 2,000 cfm HEPA filters are 100% tested and certified to provide 99.97%+ efficiency @ 0.3 microns
Safety - The PAS5000 has been independently tested and certified in accordance with applicable UL and CSA safety requirements
CALL us 800-868-0964 to determine
the number of Portable Air Scrubbers needed to produce the required
air changes per hour (ACH) for maintaining negative pressure
and effectively capturing air contaminants.
For Inquiries or Quotes Call Today 800-868-0964
Rated Airflow- up tp 4000 cfm
Air Changes Per Hour- 6 ACH in areas up to 40,000 ft?
Net Weight with Filters- 395 pounds
Dimensions (L x W x H)- 44.25 ins. L x 26.5 ins. W x 59.5 ins H
Power Supply Requirements- 230 V/30 amp/60 Hz
Normal Operating Current- 21 amps or less
Electrical Safety- NRTL-certified to comply with UL Std. 507 & CAN/CSA Std. #C22.2 No. 113-M1984 for electrical safety
Motor-five-horsepower, 230-volt single-phase motor
AT Gold Blower- Anodized-Aluminum, 5.5” peak static lift
Controls- Off/High/Low speed selector switch, green power indicator lamp, separate amber ‘Replace Pre-filter’ and ‘replace HEPA’ lamps, hour meter, resettable pop-out 12A circuit breaker
Cabinet Material- 20 gauge stainless steel construction with solid, aircraft-type rivets
Built-in Dolly- Two-wheel dolly with 10” solid, non-marking rubber rear wheels, 360? swivel front casters and a secure top handle for easy movement & control
Easy to Replace Pre-Filters- Hinged and latched pre-filter access door with a full perimeter gasket seal to protect against dirty-air bypass
Pre-Filter Mounting- Separate slide-in compartments for up to 3 pre-filter stages
Stage 1 pre-filter - Inexpensive, 1”-deep FIBER-TRAPPER 1.0 pre-filter for larger particulates (100+ microns); can be washed & reused, or treated as a disposable