PAS2400 HEPA-AIRE High Performance Portable HEPA Air Scrubber 2100 CFM
Built in transport dolly and stair climber Includes 1 Inch Pre-filter (F1821), 2 Inch particulate filter (H1902), HEPA filter (H2418-99), 12 inch H1980P inlet/outlet and 10ft. Hard wired power cord.
Exceptional performance and a full array of user-friendly features have made the Abatement Technologies® PAS2400 Portable Air Scrubber a popular choice for capturing airborne particles during construction restoration projects. With peak tested airflow of up to 2,100 cfm, and a maximum static lift of 5.5”, it’s the highest output Portable Air Scrubber that is NRTL-certified to operate safely on a 120 V/15 amp electrical supply.
The PAS2400 Portable Air Scrubber has several filter stages with exceptional dirt-holding capacity, and optional gas and odor removal capabilities:
HEPA filter - Tested and certified to 99.97% minimum efficiency @ 0.3 microns
‘Zero Bypass’ Design and True HEPA Filter
A unique cabinet design and a true high-capacity, IEST-compliant HEPA filter help ensure that the PAS2400 exhausts 99.97%+ efficiency air out of the work area, job after job, month after month.
For Inquiries or Quotes Call Today 800-868-0964
The PAS2400 comes equipped with many outstanding features including:
Portability- The upright, two-module design with built-in transport dolly enhance the mobility and maneuverability of the PAS2400 and its ability to operate in tight spaces
Power- The custom-designed, high-speed motor and AT Gold blower allow the PAS2400 to produce up to 60% more vacuum power than other 120 VAC systems
Economy- The high dirt-holding capacity of the PAS2400 pre-filters and long life non-electrostatic HEPA filter extend the useful life of the filters and reduce replacement filter costs
Efficiency- True 99.97%-certified HEPA filter retains its original 99.97%+ efficiency, even after hundreds of hours of operation
User-Friendly Controls- A complete array of convenient controls enables users to continuously monitor the operating status of the PAS2400
Safety First- ETL/ETLc-certified to conform to UL507 and CSA 22.2 safety standards
Export Model Available- The 230V/50-60Hz PAS2400TF model is designed specifically for overseas users
CALL us 800-868-0964 to determine
the number of Portable Air Scrubbers needed to produce the required
air changes per hour (ACH) for maintaining negative pressure
and effectively capturing air contaminants.
For Inquiries or Quotes Call Today 800-868-0964
Specs
Rated Airflow*- 700-2,100 cfm
Air Changes Per Hour- 6 ACH in areas up to 18,000-21,000 ft?
Net Weight with Filters- 170 pounds
Dimensions (L x W x H)- 31.50”L x 25.25”W x 49.75”H
Power Supply Requirements- 120 VAC, 60Hz, 15 amps
Normal Operating Current- 12 amps or less (safe for 15A circuits)
Electrical Safety- NRTL-certified to comply with UL Std. 507 & CAN/CSA Std. #C22.2 No. 113-M1984 for electrical safety
Motor- High-efficiency type, 3,450 RPM, 1.5 HP
AT Gold Blower- Anodized-Aluminum, 5.5” peak static lift
Controls- Off/High/Low speed selector switch, green power indicator lamp, separate amber ‘Replace Pre-filter’ and ‘replace HEPA’ lamps, hour meter, resettable pop-out 12A circuit breaker
Cabinet Material- 20 gauge stainless steel construction with solid, aircraft-type rivets
Built-in Dolly- Two-wheel dolly with 10” solid, non-marking rubber rear wheels, 360? swivel front casters and a secure top handle for easy movement & control
Easy to Replace Pre-Filters- Hinged and latched pre-filter access door with a full perimeter gasket seal to protect against dirty-air bypass
Pre-Filter Mounting- Separate slide-in compartments for up to 3 pre-filter stages
Filters:
Stage 1 pre-filter - Inexpensive, 1”-deep FIBER-TRAPPER 1.0 pre-filter for larger particulates (100+ microns); can be washed & reused, or treated as a disposable
