Contain Hazardous Airborne Particles Released During Water Restoration and Mold Remediation Projects
The new HEPA-AIRE PAS1600S and PAS1600SHS Portable Air Scrubbers from Abatement Technologies® deliver more bang for your buck compared to other negative air filtration devices. PAS1600 models have the features you are looking for such as powerful airflow, low amperage draw, a lightweight and mobile design–all at an affordable price! Plus, PAS1600 Portable Air Scrubbers come with the unmatched quality and reliability you expect from Abatement Technologies, the industry leader for high performance HEPA-filtration systems.
PAS1600S and PAS1600SHS Portable HEPA-Filtration Systems are equipped for creating negative pressure containment or use as a recirculating air scrubber. Both models capture particles in three or four filter stages with exceptional dirt holding capacity, including a final-stage HEPA filter tested and certified to capture at least 99.97% @ 0.3-micron particles. Both models operate safely on a 120 V/15 amp electric circuit with power to spare.
Standard 6”-deep HEPA filter - Tested and certified to 99.97% minimum efficiency @ 0.3 microns
Optional 12”-deep HEPA filter - Tested and certified to 99.97% minimum efficiency @ 0.3 microns
Two PAS1600 Portable Air Scrubber models are available:
HEPA-AIRE PAS1600S Standard HEPA Filtration System
The general purpose HEPA-AIRE PAS1600S model is designed to capture and contain airborne particles and odors on a wide range of jobs, from water restoration to mold abatement to construction and remodeling. This versatile two-speed model can provide up to 1,600 cfm peak delivered airflow, and maintain 6 air changes per hour (ACH) in areas as large as 16,000 ft³.
HEPA-AIRE PAS1600SHS High-Performance HEPA Filtration System
The HEPA-AIRE PAS1600SHS high-performance model provides the enhanced performance required for the toughest structural drying jobs, such as use with specialized drying attachments. A powerful 1.5 hp motor and backward curved blower that produce up to 50% more static capacity than competitive units dry structures faster, can increase productivity, and reduce drying time and costs. At peak airflow of 1,900 cfm, the PAS1600SHS can typically maintain 6 ACH in containment areas as large as 19,000 ft³.
Maneuverable and Portable
With an upright, single-module design, the PAS1600S and PAS1600SHS roll easily on 12” smooth, non-marking rear wheels.
For Inquiries or Quotes Call Today 800-868-0964
Power for Specialized Drying Attachments
The high-performance PAS1600SHS has the static power and airflow needed to dry floors with special drying equipment
The PAS1600S model and PAS1600SHS model are equipped with many outstanding design innovations such as:
Portability - Upright, single-module design with built-in transport dolly rolls easily on 12” diameter smooth, non-marking rear wheels
Ruggedness - Stainless steel cabinet is attractive and easy to clean
Efficiency - True, high-performance 99.97%-certified HEPA filter retains its original 99.97%+ efficiency even after hundreds of hours of operation
User-Friendly Controls - Recessed control panel for easy monitoring and control of the unit
Safety First - ETL/ETLc-certified to conform to UL507 and CSA 22.2 safety standards
Powerful Airflow - PAS1600SHS high-performance model creates high static pressure required for operating high-resistance drying attachments such as the Adaptidry Ceiling, Wall & Floor Drying System
CALL us 800-868-0964 to determine
the number of Portable Air Scrubbers needed to produce the required
air changes per hour (ACH) for maintaining negative pressure
and effectively capturing air contaminants.
For Inquiries or Quotes Call Today 800-868-0964
Specs
Airflow - PAS1600S: Two speed model up to 1,600 cfm. PAS1600SHS: Two speed model up to 1,900 cfm
Air Changes Per Hour - PAS1600S: 6 ACH @ 16,000 ft?. PAS 1600SHS: 6 ACH @ 19,000 ft?
Maximum Blower Static Pressure - PAS1600S: 3.0” water gauge. PAS1600SHS: 4.7” water gauge
Net Weight with Filters - PAS1600S: 124 pounds. PAS1600SHS: 131 pounds
Shipping Weight - 153 pounds
Dimensions (L x W x H) - 24.75”L x 27.5”W x 38.625”H
Power Supply Requirements - 120 volts AC, 60Hz, 15 amps
Electrical Safety - NRTL-certified to comply with UL Std. 507 & CAN/CSA Std. #C22.2 No. 113-M1984 for electrical safety
Motor/Blower - PAS1600S: 0.9 HP standard efficiency/squirrel cage. PAS1600SHS: 1.5 HP high-efficiency/backward curved
Controls - Protected recessed controls, Off/High/Low speed selector switch, power indicator lamp, separate ‘Replace Pre-filter’ and ‘replace HEPA’ lamps, digital operating hour meter
Cabinet Material - 20 gauge stainless steel construction with solid rivets
Built-in Dolly - Two-wheel dolly with 12” solid, non-marking rubber rear wheels, 360? swivel front casters and a secure top handle for easy movement and control
Easy to Replace Pre-Filters - Hinged and latched pre-filter access door with a full perimeter gasket seal to protect against dirty-air bypass
Pre-Filter Mounting - Separate slide-in compartments for up to 3 pre-filter stages
Inlet/Outlet Manifold - 12” inlet/outlet collar designed for attachment of flex duct, lay-flat duct (outlet only), or high static tools
