PAS1200 HEPA-AIRE Portable HEPA Air Scrubber 900 CFM
  Price: $1800  Shipping: $ $199.00

Sku:PAS1200

Negative Air Applications also require a hose and clamp:

Clear mylar flex duct, wire reinforced, 10 in. diameter x 25 ft. length, 1 per case. H2020-10   Price: $30  Shipping: $ $7.50 Quantity

10in. diameter locking clamp for flex duct attachment, 1 per case. H2350-10   Price: $30  Shipping: $ $7.50 Quantity

PAS HEPA- Aire 1200 Brochure

Compact, Upright Design Fits Easily into Tight Spaces

The full-feature HEPA-AIRE PAS1200 Portable Air Scrubber from Abatement Technologies®
is the stainless-steel counterpart to our PRED1200 model, with similar performance characteristics. The PAS1200 features variable airflow control from 150 cfm to 900 cfm. Multiple units can be daisy-chained on one 15-amp circuit via the GFCI-protected duplex receptacles. The PAS1200 is capable of maintaining 6 ACH in spaces up to 7,500-9,000 ft³ at peak rated airflow.

The PAS1200 Portable Air Scrubber is designed to employ up to four filter stages to remove potentially hazardous airborne particles from water-loss restoration projects.

• First stage pre-filter - Inexpensive 1"-deep pre-filter for larger particles
• Second stage pre-filter - 2"-deep pleated filter for medium-sized particles
• Third stage pre-filter (optional, not included with the unit) - 2"-deep high-capacity carbon filter for gases and odors 
• Final stage - Tested & certified 99.97%-efficient metal-frame HEPA filter

Features of the HEPA-AIRE PAS1200 Portable Air Scrubber include:

• Easy to Transport - 8” non-marking rear wheels with smooth tires roll quietly and protect floors
• Powerful Blower - High-efficiency airfoil blower provides 6 ACH @ 7,500-9,000 ft³
• Maneuverable in Small Spaces - Front swivel casters allow the PAS1200 to “turn on a dime” in tight spaces
• Solid-Rivet Aircraft Construction - Strong leak-resistant cabinets
• User-Friendly Controls - A complete array of convenient controls enables users to continuously monitor the operating status of the PAS1200
• Safety First - ETL/ETLc-certified to conform to UL507 and CSA 22.2 safety standards
• Easy 'No Tools' Pre-Filter Access - Fast filter changes
• Separate Pre-Filter Compartments - Less bypass, helps prevent premature HEPA loading
• 230 VAC/50 Hz Export Model - PAS1200TF runs on 230 Volt/50 Hz current (1,000-1,250 m³/hr.)

Click to download the HEPA-AIRE PAS 1200 brochure. Download the features, performance and specifications for all HEPA-AIRE Portable Air Scrubber models.

Learn more about the importance of maintaining sufficient air changes per hour (ACH) and negative pressure to properly clean the air.

Learn more about true HEPA filtration and IEST (Institute of Environmental Sciences & Technology) manufacturing, testing and labeling requirements.

Click for more information on Nationally Recognized Testing Laboratory product safety certification and why it is so important.

Click for more information on the difference between tested ‘in-use’ airflow ratings versus meaningless ‘nominal’ or ‘free air’ blower ratings

CALL us 800-868-0964 to determine the number of Portable Air Scrubbers needed to produce the required air changes per hour (ACH) for maintaining negative pressure and effectively capturing air contaminants.

• Airflow - 150-900 cfm
• Air Changes Per Hour - 6 ACH @ 9,000 ft?
• Net Weight with Filters - 85 pounds
• Shipping Weight - 95 pounds
• Dimensions (L x W x H) - 19.25”L x 22”W x 39”H
• Power Supply Requirements - 120 VAC, 60Hz, 15 amps
• Power Consumption - 3.5 amps or less
• GFCI-Protected Duplex Receptacle - Daisy-chain up to 3 units on one 15 amp circuit
• Motor/Blower - High-efficiency airfoil type motorized impeller rated for 100,000 hours, with thermal overload protection & auto reset
• Circuit Breaker - 12 amp pop-out style
• Electrical Safety - NRTL-certified to comply with UL Std. 507 & CAN/CSA Std. #C22.2 No. 113-M1984 for electrical safety
• Cabinet Material - 20 gauge corrosion-resistant stainless steel
• Cabinet Construction - Solid, aircraft-type rivets
• Built-in Dolly - Integral transport dolly with 8” rear wheels and solid, non-marking rubber tires, 360 ? swivel front casters and an ergonomic top handle for easy control and handling
• No Tools Pre-Filter Access - Hinged door secured by rotating latches, with full perimeter gasket seal to protect against bypass of contaminated air
• Pre-filter Mounting - Individual shelves for each pre-filter
• Filters:
  • Stage 1 pre-filter - Inexpensive, 1 in deep FIBER-TRAPPER pre-filter for capturing large particulates; can be washed and reused or treated as a disposable (MERV 4)
  • Stage 2 pre-filter - 2 in-deep pleated prefilter (MERV 6)
  • Stage 3 optional pre-filter - 2 in-deep high-capacity VAPOR-LOCK carbon filter for gas and odor adsorption (MERV 7)
  • Final stage HEPA filter - IEST compliant metal-frame, HEPA filter with tested and certified minimum efficiency of 99.97% @ 0.3 microns

1in. First stage Fiber Trapper particulate pre-filter, Case of 12.

F621-12
  Price: $25  Shipping: $ $17.00

2in. Second stage particulate filter, Case of 6.

H502-6
  Price: $42  Shipping: $ $19.00

2in. Vapor-Lock particulate/carbon filter, 1 per Case.

VL602
  Price: $22  Shipping: $ $15.00

2in. Vapor-Lock particulate/carbon filter, Case of 6.

VL602-6
  Price: $110  Shipping: $ $27.00

2in. Vapor-Lock high capacity activated carbon filter, 1 per Case.

VL1002
  Price: $40  Shipping: $ $17.00

2in. Vapor-Lock high capacity activated carbon filter, case of 6.

VL1002-6
  Price: $210  Shipping: $ $49.00

Final stage 99.97% HEPA filter, 1 per case.

H610C-99
  Price: $175  Shipping: $ $25.00

Clear mylar flex duct, wire reinforced, 10 in. diameter x 25 ft. length, 1 per case.

H2020-10
  Price: $30  Shipping: $ $7.50

Clear mylar flex duct, wire reinforced, 10 in. diameter x 25 ft. length, 6/cs.

H2020-10-6
  Price: $130  Shipping: $ $25.00

Clear heavy duty PVC flex duct, wire reinforced, 10 in. dia. x 25 ft., 1 per case.

H2030-10
  Price: $220  Shipping: $ $15.00

10in. diameter locking clamp for flex duct attachment, 1 per case.

H2350-10
  Price: $30  Shipping: $ $7.50

Powder coated 10? dia. inlet/exhaust collar for flex duct attachment

PAS680
  Price: $70  Shipping: $ $15.00

Air Scrubbers USA
150 Pioneer Trail PMB 171
Chaska, MN, 55318
Telephone: 800-868-0964
Fax: (480) 247-5592


e-mail Information
© 2003 - 2012 Fume Extractors USA All rights reserved.