Source Capture Air Scrubbers for Laser Engraving
Lasers release airborne fumes and particles which threaten workplace health and safety.
These serious air scrubbers offer protection for operators, safeguard sensitive laser optics and help prevent contamination.
| Material |
Air Pollutants |
Required Filtration |
Recommended Unit |
| Metal, Polyethylene, Polycarbonate & Glass |
Mostly particulate, some VOCs |
HEPA, 2 layer easy-access pre-filter, special carbon blend for VOCs, 0.5 micron pre-fitler before the carbon, high performance blower |
Laser LX
and
RSU 20 CCHR |
| Polystyrene, PVC & Acrylic |
High levels of VOC Gas, some particulate |
Deep-bed carbon filter for maximum adsorption, special carbon blend, 99% efficient electrostatic particle filtration |
Laser LX
and
RSU 20 CCHR |
| Polypropylene |
Equal VOC and particulate |
Deep-bed carbon filter for maximum adsorption, special carbon blend, 99% efficient electrostatic particle filtration |
Depending on CFM
Call for consultaion
800-868-0964 |
| Wood |
High volume of particulate smoke, some VOCs |
HEPA, 2 layer easy-access pre-filter, special carbon blend for VOCs, 0.5 micron pre-fitler before the carbon, high performance blower |
Depending on CFM
Call for consultaion
800-868-0964 |
Allerair Laser LX Air Purifier
 |
Code: alrap-laser-lx
Base Price: $1,999.98
Shipping Weight: 58 lb
Freight Charges: Call 800-868-0964 for Quote
Dimensions: 27" (height) x 15" (diameter)
includes flange
Please note: This item is not returnable
Damaged or defective units will be repaired or replaced.
|
For Inquiries, Shipping Quotes or Orders
Call 800-868-0964
MORE INFORMATION? - CLICK HERE -
Perfected for laser engravers.
Contaminated air is blown directly into the unit. Purified air is ejected out of the pure-air vent.
Fine particulate matter is captured by a specially designed 0.3 micron electrostatic particle collector with a 30 PPI foam particulate pre-filter for larger particles.
A medical grade HEPA filter removes 99.97% of 0.3 micron particulate matter.
Large 24 lb Vocarb carbon filter adsorbs volatile organic compounds, gases, smoke and odor.
Designed to be connected directly to the exhaust duct coming from an engraver.
6" flange for ducting.
Delivers 400 Cubic Feet Per Minute of clean air
|
Electrocorp RSU20-CCH Air Scrubber
Space SaverTM Series Odor Controller
 |
Code: RSU20-CCH
Price: $2,554.98 plus Shipping
Operating Weight 84 lbs.
Freight Charges: Call 800-868-0964 for Quote
Dimensions: Height 31 " Diameter 18 "
Please note: This item is not returnable
Damaged or defective units will be repaired or replaced.
The unit is cylindrical in shape and, depending on model, has a footprint of 12-14 inches depending on the model . This is a
ductless, re-circulating air scrubber with built-in casters so it can be easily rolled around on your floor. It has a 360 degree
air-in draw using a a three stage filtration process. The first stage filters the air of dust
particulates down to 10 microns in size via a pre-filter. The second stage filters the air of particulates down to .3 microns in size
(1/76,200 of an inch) via a DOP rated HEPA filter. The third stage removes approximately 90% of all gas phase contaminants (VOCs) per air pass. It filters the
air of dust and contaminant gases, then ejects the cleaned air out the top of the unit to the ceiling. The gentle ceiling to floor
air pressure generated by the RSU creates the correct form of air movement needed to force heavier than air VOCs toward
the floor to then be captured as they are drawn through the RSU carbon cartridge.
|
For Inquiries, Shipping Quotes or Orders
Call 800-868-0964
MORE INFORMATION? - CLICK HERE -
Configuration
- 300 CFM air flow Delivered
- 34 lb. carbon filter.
- Sound level
48-66 dB |
$2,5549.98
* Base Price
Plus Shipping |
|
|
