| Air Scrubber |
Configuration |
Description |
|
|
Dimensions: 23" x 18"
Shipping Weight: 70 lbs. with pallet
Operating Weight: 55 lbs.
# of units per pallet: 1
Filtration System: Blue tacky 10 micron pre-filter, carbon filter wrapped with an electrostatic particle filter, material rated at 99% efficient at 0.1 microns
Carbon: 20 lbs.
Carbon w/canister: 23 lbs.
HEPA: N/A
Electrostatic: Electrostatic particle filter, material rated at 99% efficient at 0.1 microns
CFM: 350
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz
Amps: 1.27 / .63
Cord length: 8 ft.
Decibel Level: 44 - 62 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 5 x 2" wheels with frame
Pressure Gauge /Light Indicator: N/A
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
For Airborne Chemicals and Partcles
The RSU 12 CC delivers up to 350 CFM (Cubic Feet per Minute).
The RSU 12 CC delivers enough filtration power to change the air in a 620 sq. ft. room with 8.5' ceiling 4 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
Low noise 44 dB on Low 62 dB on high three feet from the machine.
Scrubbed air is ejected out the top of the unit to the ceiling to create a room-wide ceiling to floor laminar air flow pattern that is key to maintaining high quality indoor air.
Contaminated air is drawn in 360 deg around the circumference of the unit.
The RSU has a very small footprint and is easily moved on its 2" wheels.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers.
|
|
|
Dimensions: 23" x 18"
Shipping Weight: 70 lbs. with pallet
Operating Weight: 55 lbs.
# of units per pallet: 1
Filtration System: Blue tacky 10 micron pre-filter, carbon filter wrapped with an electrostatic particle filter, material rated at 99% efficient at 0.1 microns
Carbon: 20 lbs.
Carbon w/canister: 23 lbs.
HEPA: N/A
Electrostatic: Electrostatic particle filter, material rated at 99% efficient at 0.1 microns
CFM: 350
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz
Amps: 1.27 / .63
Cord length: 8 ft.
Decibel Level: 44 - 62 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 5 x 2" wheels with frame
Pressure Gauge /Light Indicator: N/A
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
Duct Directly to Equipment to Capture Chemicals and Partcles
Laser engravers, large format printers and other equipment may be ducted directley to the RSU 12 CCR.
The air flow of R models is reversed. Contaminated air is ducted from the engraver or or other equipment directley to the top of the unit. Clean air is ejected 360 deg around the circumference of the unit.
The RSU 12 CC delivers up to 350 CFM (Cubic Feet per Minute).
The variable speed control allows you to fine tune motor speed and noise.
Low noise 44 dB on Low 62 dB on high three feet from the machine.
The RSU has a very small footprint and is easily moved on its 2" wheels.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers.
|
|
|
Dimensions:23 " x 18"
Shipping Weight: 75 lbs. with pallet
Operating Weight: 60 lbs.
# of units per pallet: 1
Filtration System: Blue tacky 10 micron pre-filter, carbon filter, 99% electrostatic particle filter wrapped around a medical-grade HEPA filter
Carbon: 20 lbs.
Carbon w/canister: 23 lbs.
HEPA: Medical-grade HEPA
Electrostatic: Electrostatic wrap around the HEPA
CFM: 125 - 300
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz
Amps: 1.27 / .63
Cord length: 8 ft.
Decibel Level: 44 - 62 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 5 x 2" wheels with frame
Pressure Gauge /Light Indicator: N/A
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
For Airborne Chemicals and High Partcle Concentrations
The RSU 12 CCH delivers up to 350 CFM (Cubic Feet per Minute).
The RSU 12 CCH delivers enough filtration power to change the air in a 620 sq. ft. room with 8.5' ceiling 4 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
Low noise 44 dB on Low 62 dB on high three feet from the machine.
Scrubbed air is ejected out the top of the unit to the ceiling to create a room-wide ceiling to floor laminar air flow pattern that is key to maintaining high quality indoor air.
Contaminated air is drawn in 360 deg around the circumference of the unit.
The RSU has a very small footprint and is easily moved on its 2" wheels.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers.
|
|
|
Dimensions:23 " x 18"
Shipping Weight: 75 lbs. with pallet
Operating Weight: 60 lbs.
# of units per pallet: 1
Filtration System: Blue tacky 10 micron pre-filter, carbon filter, 99% electrostatic particle filter wrapped around a medical-grade HEPA filter
Carbon: 20 lbs.
Carbon w/canister: 23 lbs.
HEPA: Medical-grade HEPA
Electrostatic: Electrostatic wrap around the HEPA
CFM: 125 - 300
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz
Amps: 1.27 / .63
Cord length: 8 ft.
Decibel Level: 44 - 62 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 5 x 2" wheels with frame
Pressure Gauge /Light Indicator: N/A
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
Duct Directly to Equipment to Capture Chemicals and Partcles
Laser engravers, large format printers and other equipment may be ducted directley to the RSU 12 CCHR.
The air flow of R models is reversed. Contaminated air is ducted from the engraver or or other equipment directley to the top of the unit. Clean air is ejected 360 deg around the circumference of the unit.
The RSU 12 CCHR delivers up to 350 CFM (Cubic Feet per Minute).
The variable speed control allows you to fine tune motor speed and noise.
Low noise 44 dB on Low 62 dB on high three feet from the machine.
The RSU has a very small footprint and is easily moved on its 2" wheels.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers.
|
|
|
Dimensions: 36 " x 18"
Shipping Weight: 85 lbs. with pallet
Operating Weight: 70 lbs.
# of units per pallet: 1
Filtration System: Blue tacky 10 micron pre-filter, carbon filter, insert of 99% electrostatic and a 30 ppi foam gasket
Carbon: 42 lbs.
Carbon w/canister: 50 lbs.
HEPA: N/A
Electrostatic: Electrostatic particle filter, material rated at 99% efficient at 0.1 microns
CFM: 300
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz
Amps: 1.27 / 0.63
Cord length: 8 ft.
Decibel Level: 48 - 62 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 5 x 2" wheels with frame
Pressure Gauge /Light Indicator: N/A
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
For Airborne Chemicals and Partcles
The RSU 12x24 CC delivers up to 300 CFM (Cubic Feet per Minute).
The RSU 12x24 CC delivers enough filtration power to change the air in a 530 sq. ft. room with 8.5' ceiling 4 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
Low noise 48 dB on Low 62 dB on high three feet from the machine.
Scrubbed air is ejected out the top of the unit to the ceiling to create a room-wide ceiling to floor laminar air flow pattern that is key to maintaining high quality indoor air.
Contaminated air is drawn in 360 deg around the circumference of the unit.
The RSU has a very small footprint and is easily moved on its 2" wheels.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers.
|
|
|
Technical Characteristics
Dimensions: 36 " x 18"
Shipping Weight: 85 lbs. with pallet
Operating Weight: 70 lbs.
# of units per pallet: 1
Filtration System: Blue tacky 10 micron pre-filter, carbon filter, insert of 99% electrostatic and a 30 ppi foam gasket
Carbon: 42 lbs.
Carbon w/canister: 50 lbs.
HEPA: N/A
Electrostatic: Electrostatic particle filter, material rated at 99% efficient at 0.1 microns
CFM: 300
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz
Amps: 1.27 / 0.63
Cord length: 8 ft.
Decibel Level: 48 - 62 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 5 x 2" wheels with frame
Pressure Gauge /Light Indicator: N/A
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
Duct Directly to Equipment to Capture Chemicals and Partcles
Laser engravers, large format printers and other equipment may be ducted directley to the RSU 12x24 CCR.
The air flow of R models is reversed. Contaminated air is ducted from the engraver or or other equipment directley to the top of the unit. Clean air is ejected 360 deg around the circumference of the unit.
The RSU 12x24 CCR delivers up to 300 CFM (Cubic Feet per Minute).
The variable speed control allows you to fine tune motor speed and noise.
Low noise 44 dB on Low 62 dB on high three feet from the machine.
The RSU has a very small footprint and is easily moved on its 2" wheels.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers.
|
|
|
Dimensions: 25 " x 18"
Shipping Weight: 80 lbs. with pallet
Operating Weight: 62 lbs.
# of units per pallet: 1
Filtration System: Blue tacky 10 micron pre-filter, carbon filter, insert of 99% electrostatic and a 30 ppi foam gasket
Carbon: 21 lbs.
Carbon w/canister: 25 lbs.
HEPA: N/A
Electrostatic: Electrostatic particle filter, material rated at 99% efficient at 0.1 microns
CFM: 100 - 400
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz
Amps: 2.1 / 1.1
Cord length: 8 ft.
Decibel Level: 48 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 5 x 2" wheels with frame
Pressure Gauge /Light Indicator: N/A
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
Duct Directly to Equipment to Capture Chemicals and Partcles
Laser engravers, large format printers and other equipment may be ducted directley to the RSU 14 CCR.
The air flow of R models is reversed. Contaminated air is ducted from the engraver or or other equipment directley to the top of the unit. Clean air is ejected 360 deg around the circumference of the unit.
The RSU 14 CCR delivers up to 400 CFM (Cubic Feet per Minute).
The variable speed control allows you to fine tune motor speed and noise.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers. |
|
|
Dimensions: 31 " x 18"
Shipping Weight: 95 lbs. with pallet
Operating Weight: 80 lbs.
# of units per pallet: 1
Filtration System: Blue tacky 10 micron pre-filter, carbon filter wrapped with an electrostatic particle filter, material rated at 99% efficient at 0.1 microns
Carbon: 30 lbs.
Carbon w/canister: 34 lbs.
HEPA: N/A
Electrostatic: Electrostatic particle filter, material rated at 99% efficient at 0.1 microns
CFM: 200 - 450
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz
Amps: 1.3 / .65
Cord length: 8 ft.
Decibel Level: 48 - 66 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 5 x 2" wheels with frame
Pressure Gauge /Light Indicator: N/A
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
For Airborne Chemicals and Partcles
The RSU 20 CC delivers up to 450 CFM (Cubic Feet per Minute).
The RSU 20 CC delivers enough filtration power to change the air in a 800 sq. ft. room with 8.5' ceiling 4 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
Low noise 48 dB on Low 66 dB on high three feet from the machine.
Scrubbed air is ejected out the top of the unit to the ceiling to create a room-wide ceiling to floor laminar air flow pattern that is key to maintaining high quality indoor air.
Contaminated air is drawn in 360 deg around the circumference of the unit.
The RSU has a very small footprint and is easily moved on its 2" wheels.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers.
|
|
|
Dimensions: 31 " x 18"
Shipping Weight: 95 lbs. with pallet
Operating Weight: 80 lbs.
# of units per pallet: 1
Filtration System: Blue tacky 10 micron pre-filter, carbon filter wrapped with an electrostatic particle filter, material rated at 99% efficient at 0.1 microns
Carbon: 30 lbs.
Carbon w/canister: 34 lbs.
HEPA: N/A
Electrostatic: Electrostatic particle filter, material rated at 99% efficient at 0.1 microns
CFM: 200 - 450
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz
Amps: 1.3 / .65
Cord length: 8 ft.
Decibel Level: 48 - 66 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 5 x 2" wheels with frame
Pressure Gauge /Light Indicator: N/A
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
Duct Directly to Equipment to Capture Chemicals and Partcles
Laser engravers, large format printers and other equipment may be ducted directley to the RSU 20 CCR.
The air flow of R models is reversed. Contaminated air is ducted from the engraver or or other equipment directley to the top of the unit. Clean air is ejected 360 deg around the circumference of the unit.
The RSU 20 CCR delivers up to 400 CFM (Cubic Feet per Minute).
The variable speed control allows you to fine tune motor speed and noise.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers.
|
|
|
Dimensions: 31 " x 18"
Shipping Weight: 104 lbs. with pallet
Operating Weight: 84 lbs.
# of units per pallet: 1
Filtration System: Blue tacky 10 micron pre-filter, carbon filter, 99% electrostatic particle filter wrapped around a medical-grade HEPA filter
Carbon: 30 lbs.
Carbon w/canister: 34 lbs.
HEPA: Medical-grade HEPA
Electrostatic: Electrostatic wrap around the HEPA
CFM: 125 - 300
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz
Amps: 1.3 / .65
Cord length: 8 ft.
Decibel Level: 48 - 66 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 5 x 2" wheels with frame
Pressure Gauge /Light Indicator: N/A
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
For Airborne Chemicals and High Particle Concentrations
The RSU 20 CCH delivers up to 450 CFM (Cubic Feet per Minute).
The RSU 20 CCH delivers enough filtration power to change the air in a 800 sq. ft. room with 8.5' ceiling 4 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
Low noise 48 dB on Low 66 dB on high three feet from the machine.
Scrubbed air is ejected out the top of the unit to the ceiling to create a room-wide ceiling to floor laminar air flow pattern that is key to maintaining high quality indoor air.
Contaminated air is drawn in 360 deg around the circumference of the unit.
The RSU has a very small footprint and is easily moved on its 2" wheels.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers.
|
|
|
Dimensions: 31 " x 18"
Shipping Weight: 104 lbs. with pallet
Operating Weight: 84 lbs.
# of units per pallet: 1
Filtration System: Blue tacky 10 micron pre-filter, carbon filter, 99% electrostatic particle filter wrapped around a medical-grade HEPA filter
Carbon: 30 lbs.
Carbon w/canister: 34 lbs.
HEPA: Medical-grade HEPA
Electrostatic: Electrostatic wrap around the HEPA
CFM: 450
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz
Amps: 1.3 / .65
Cord length: 8 ft.
Decibel Level: 48 - 66 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 5 x 2" wheels with frame
Pressure Gauge /Light Indicator: N/A
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
Duct Directly to Equipment to Capture Chemicals and Partcles
Laser engravers, large format printers and other equipment may be ducted directley to the RSU 20 CCHR.
The air flow of R models is reversed. Contaminated air is ducted from the engraver or or other equipment directley to the top of the unit. Clean air is ejected 360 deg around the circumference of the unit.
The RSU 20 CCHR delivers up to 400 CFM (Cubic Feet per Minute).
The variable speed control allows you to fine tune motor speed and noise.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers.
|
|
|
Dimensions: 39.5 " x 20"
Shipping Weight: 167 lbs. with pallet
Operating Weight: 132 lbs.
# of units per pallet: 1
Filtration System: Blue tacky 10 micron pre-filter, carbon filter, insert of 99% electrostatic and a 30 ppi foam gasket
Carbon: 51 lbs.
Carbon w/canister: 60 lbs.
HEPA: N/A
Electrostatic: Electrostatic particle filter, material rated at 99% efficient at 0.1 microns
CFM: 250 - 950
Speed: Variable
|
Voltage: 115/60Hz ONLY
Amps: 3.3
Cord length: 8 ft.
Decibel Level: 70 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 4 x 3" wheels with frame
Pressure Gauge /Light Indicator: N/A
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
For Airborne Chemicals and Partcles
The RSU 24 CC delivers up to 950 CFM (Cubic Feet per Minute).
The RSU 24 CC delivers enough filtration power to change the air in a 1,675 sq. ft. room with 8.5' ceiling 4 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
Scrubbed air is ejected out the top of the unit to the ceiling to create a room-wide ceiling to floor laminar air flow pattern that is key to maintaining high quality indoor air.
Contaminated air is drawn in 360 deg around the circumference of the unit.
The RSU has a very small footprint and is easily moved on its 2" wheels.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers.
|
|
|
Dimensions: 39.5 " x 20"
Shipping Weight: 167 lbs. with pallet
Operating Weight: 132 lbs.
# of units per pallet: 1
Filtration System: Blue tacky 10 micron pre-filter, carbon filter, insert of 99% electrostatic and a 30 ppi foam gasket
Carbon: 51 lbs.
Carbon w/canister: 60 lbs.
HEPA: N/A
Electrostatic: Electrostatic particle filter, material rated at 99% efficient at 0.1 microns
CFM: 250 - 950
Speed: Variable
|
Voltage: 115/60Hz ONLY
Amps: 3.3
Cord length: 8 ft.
Decibel Level: 70 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 4 x 3" wheels with frame
Pressure Gauge /Light Indicator: N/A
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
Duct Directly to Equipment to Capture Chemicals and Partcles
Laser engravers, large format printers and other equipment may be ducted directley to the RSU 24 CCR.
The air flow of R models is reversed. Contaminated air is ducted from the engraver or or other equipment directley to the top of the unit. Clean air is ejected 360 deg around the circumference of the unit.
The RSU 24 CCR delivers up to 950 CFM (Cubic Feet per Minute).
The variable speed control allows you to fine tune motor speed and noise.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers.
|
|
|
Dimensions: 39.5 " x 20"
Shipping Weight: 133 lbs. with pallet
Operating Weight: 70 lbs.
# of units per pallet: 1
Filtration System: Blue tacky 10 micron pre-filter, 99% electrostatic particle filter wrapped around a medical-grade HEPA filter
Carbon: N/A
Carbon w/canister: N/A
HEPA: Medical-grade HEPA
Electrostatic: Electrostatic wrap around the HEPA
CFM: 250 - 950
Speed: Variable
|
Voltage: 115/60Hz ONLY
Amps: 3.3
Cord length: 8 ft.
Decibel Level: 68 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 4 x 3" wheels with frame
Pressure Gauge /Light Indicator: Yes
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
For Airborne Partcles
The RSU 24 H delivers up to 950 CFM (Cubic Feet per Minute).
The RSU 24 H delivers enough filtration power to change the air in a 1,675 sq. ft. room with 8.5' ceiling 4 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
Scrubbed air is ejected out the top of the unit to the ceiling to create a room-wide ceiling to floor laminar air flow pattern that is key to maintaining high quality indoor air.
Contaminated air is drawn in 360 deg around the circumference of the unit.
The RSU has a very small footprint and is easily moved on its 2" wheels.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers.
|
|
|
Dimensions: 71 " x 20"
Shipping Weight: 240 lbs. with pallet
Operating Weight: 200 lbs.
# of units per pallet: 1
Filtration System: Blue tacky 10 micron pre-filter, carbon filter, insert of 99% electrostatic and a 30 ppi foam gasket
Carbon: 105 lbs.
Carbon w/canister: 120 lbs.
HEPA: N/A
Electrostatic: Electrostatic particle filter, material rated at 99% efficient at 0.1 microns
CFM: 500 - 1800
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz Please specify when ordering
Amps: 4.8 / 2.4
Cord length: 8 ft.
Decibel Level: 70 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 4 x 3" wheels with frame
Pressure Gauge /Light Indicator: N/A
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
For Airborne Chemicals and Partcles
The RSU 48 CC delivers up to 1,800 CFM (Cubic Feet per Minute).
The RSU 48 CC delivers enough filtration power to change the air in a 3,170 sq. ft. room with 8.5' ceiling 4 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
Scrubbed air is ejected out the top of the unit to the ceiling to create a room-wide ceiling to floor laminar air flow pattern that is key to maintaining high quality indoor air.
Contaminated air is drawn in 360 deg around the circumference of the unit.
The RSU has a very small footprint and is easily moved on its 2" wheels.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers.
|
|
|
Dimensions: 71 " x 20"
Shipping Weight: 240 lbs. with pallet
Operating Weight: 200 lbs.
# of units per pallet: 1
Filtration System: Blue tacky 10 micron pre-filter, carbon filter, insert of 99% electrostatic and a 30 ppi foam gasket
Carbon: 105 lbs.
Carbon w/canister: 120 lbs.
HEPA: N/A
Electrostatic: Electrostatic particle filter, material rated at 99% efficient at 0.1 microns
CFM: 500 - 1800
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz Please specify when ordering
Amps: 4.8 / 2.4
Cord length: 8 ft.
Decibel Level: 70 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 4 x 3" wheels with frame
Pressure Gauge /Light Indicator: N/A
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
Duct Directly to Equipment to Capture Chemicals and Partcles
Laser engravers, large format printers and other equipment may be ducted directley to the RSU 48 CCR.
The air flow of R models is reversed. Contaminated air is ducted from the engraver or or other equipment directley to the top of the unit. Clean air is ejected 360 deg around the circumference of the unit.
The RSU 48 CCR delivers up to 1,800 CFM (Cubic Feet per Minute).
The variable speed control allows you to fine tune motor speed and noise.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers.
|
|
|
Dimensions: 71 " x 20"
Shipping Weight: 145 lbs. with pallet
Operating Weight: 100 lbs.
# of units per pallet: 1
Filtration System: Blue tacky 10 micron pre-filter, 99% electrostatic particle filter wrapped around a medical-grade HEPA filter
Carbon: N/A
Carbon w/canister: N/A
HEPA: Medical-grade HEPA
Electrostatic: Electrostatic wrap around the HEPA
CFM: 500 - 1800
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz Please specify when ordering
Amps: 4.8 / 2.4
Cord length: 8 ft.
Decibel Level: 70 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 4 x 3" wheels with frame
Pressure Gauge /Light Indicator: Yes
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
For Airborne Partcles
The RSU 48 H delivers up to 1,800 CFM (Cubic Feet per Minute).
The RSU 48 H delivers enough filtration power to change the air in a 3,170 sq. ft. room with 8.5' ceiling 4 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
Scrubbed air is ejected out the top of the unit to the ceiling to create a room-wide ceiling to floor laminar air flow pattern that is key to maintaining high quality indoor air.
Contaminated air is drawn in 360 deg around the circumference of the unit.
The RSU has a very small footprint and is easily moved on its 2" wheels.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers.
|
