Electrocorp RSU 20 CC
For Control of Airborne Chemicals Odors and Particles
Delivers 450 CFM 30 lb Carbon Filter
Since 1985, Electrocorp has designed and manufactured industrial air scrubbers for clients such as the U.S. Navy, U.S.
Army Corps of Engineers, Boeing, Dupont, and hospitals including Chicago General, Downtown New York Medical Center
and Kaiser Permanente.
RSU 20 CC
RSU units have a ducting flange on the top for hose attachement. This enables the creation of a negative air pressure zone. RSU R models have a reversed motor to enable the creation of a positive pressure zone.
The R models may be directley ducted to Laser Engravers and Printers.
The RSU-20-CC Radial Scrubbing Unit is designed to remove gases and odors as well as particulate from your indoor air.
The ceiling to floor air pressure generated by the RSU creates the correct form of air movement needed to force heavier than air VOCs and particles toward the floor to then be captured as they are drawn through the RSU.
It has a 360 degree air-in draw and is efficient in removing approximately 90% of gases/odors and 99% of airborne particulate phase contaminants at .1 microns per air pass.
No costly ductwork is required - ductless, re-circulating air scrubber. The small footprint for this model allows it to be placed in areas where open floor space is limited. Built-in casters allow it to be easily rolled around.
The scrubbed air is ejected out the top of the unit to the ceiling to create a room-wide ceiling to floor laminar air flow pattern that is key to maintaining the highest quality indoor air. Designed for 24 hr. operation.
Electrocorp provides a 1 year warranty. Please Note: This is a commercial unit and is not returnable.
Dimensions: 31 " x 18"
Shipping Weight: 95 lbs. with pallet
Operating Weight: 80 lbs.
# of units per pallet: 1
Filtration System: Blue tacky 10 micron pre-filter, carbon filter wrapped with an electrostatic particle filter, material rated at 99% efficient at 0.1 microns
Carbon: 30 lbs.
Carbon w/canister: 34 lbs.
Electrostatic: Electrostatic particle filter, material rated at 99% efficient at 0.1 microns
CFM: 200 - 450
Voltage: 115/60Hz or 230/50Hz
Amps: 1.3 / .65
Cord length: 8 ft.
Decibel Level: 48 - 66 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 5 x 2" wheels with frame
Pressure Gauge /Light Indicator: N/A
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
Air Scrubbers USA