RAP48-CC Radial Air Scrubber Series Space SaverTM
Odor Controller
Electrocorp RAP48-CC Air Scrubber
Space SaverTM Series Odor Controller
|
Code: RAP48-CC
Price: $6,324.98 plus Shipping
Operating Weight: 200 lbs.
Freight Charges: Call 800-868-0964 for Quote
Dimensions: Height 62 " Diameter 22 "
Please note: This item is not returnable
Damaged or defective units will be repaired or replaced.
- Designed for 24 hour – always on
operation
- Captures VOCs and odors
- Pre-filter removes particulate to 10
microns
- Creates full room, ceiling-to-floor
laminar air flow pattern
- Clean all the air in a 20 x 40 x 9 room in
4 minutes on high speed
- Portable - moves easily on 2-1/4”
diameter wheels
- Speed selectable from 500 CFM to
1800 CFM
- Easy servicing; no tools required
- Powder coated steel to resist chemicals and for easy cleaning
- Quiet operation: Faint (normal private
office noise) on low speed
|
For Inquiries, Shipping Quotes or Orders
Call 800-868-0964
MORE INFORMATION? - CLICK HERE -
Configuration
-1,800 CFM air flow Delivered
- 120 lb. carbon filter.
- Sound level
50-64 dB |
$6,324.98
* Base Price
Plus Shipping |
| To Order Call 800-868-0964 |
Since 1985, electrocorp has designed and manufactured industrial air scrubbers for clients such as the U.S. Navy, U.S.
Army Corps of Engineers, Boeing, Dupont, and hospitals including Chicago General, Downtown New York Medical Center
and Kaiser Permanente. Each electrocorp RAP (Radial Air Scrubber) creates a ceiling-to-floor laminar air flow typical of
high tech industrial clean rooms for optimal air scrubbing efficiency.
The RAP48-CC Space SaverTM Series Air Scrubber is cylindrical in shape and is designed to remove gases and
odors from your indoor air. This Radial Scrub Unit is a ductless, re-circulating scrubber with built-in casters so it
can be easily rolled around. It has a 360 degree air-in draw through 23 square feet of grill area. The RAP48-CC
uses a Two Stage filtration process. The First Stage filters the air of dust particulate down to 10 microns in size
via a pre-filter. The Second Stage is a deep bed carbon filter which removes VOCs and other gases and odors
from the air. The scrubbed air is ejected out the top of the unit to the ceiling to create a room-wide ceiling-to-floor
laminar air flow pattern. No costly ductwork is required. The small footprint for this model allows it to be placed in
areas where open floor space is limited.
| Air Flow and Mechanical: |
Carbon Cartridge |
| Air flow selector |
500 - 1,800 CFM |
| Replaceable pre-filter - collects particles to 10 microns |
yes |
| Replaceable/Refillable carbon cartridges for gas removal |
2 |
| Casters allow easy placement and removal |
yes |
| Sound level (at 500 CFM / 1500 CFM at 1 meter) |
50dB / 64dB |
| |
|
| Electrical: |
|
| UL/CSA listed blower |
1 |
| Continuous duty rated – run 24 hours |
yes |
| Internal thermal protection |
yes |
| Power cord length - ft. |
6' |
| Voltage / Amps |
115VAC / 60Hz / 3.6 amps |
| |
|
| Dimensions and Weights: |
|
| Height / Diameter |
62" / 22” |
| Carbon content (carbon mixture #100) |
105 lbs. |
| Operating Weight / Shipping Weight |
175 lbs. / XXX lbs. |
| |
|
|