| Air Scrubber |
Configuration |
Description |
|
|
Dimensions: 18.5" (h) x 25"(w) X 15"(d)
Shipping Weight: 60 LBS.
Operating Weight: 45 lbs.
# of units per pallet: 1
Filtration System: 3" Deep HEPA Filter, Pre-Filter
Carbon w/canister: 1N/A
HEPA: medical-grade HEPA
CFM: 450 Delivered
Speed: Variable
|
Voltage: 115/60Hz or 230/60Hz Please specify when ordering
Amps: 1.76 / .88
Cord length: 8 ft.
Decibel Level: 55 - 75 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: Moveable, on 2" industrial casters
Pressure Gauge /Light Indicator: Yes
Filter Access: Rear latch
Options: N/A
Colors: Black with yellow and black safety stripe
Motor Details: Motorized impeller in a housing
|
|
For Airborne Partcle Control
The Air Marshal 1000 delivers up to 450 CFM (Cubic Feet per Minute).
The Air Marshal 1000 contains a 3 inch deep HEPA flter. A pre-filter captures larger particles.
A hose can be connected to the 12" exhaust flange to create a negative air pressure zone.
A 12" intake flange may be ordered with the Air Scrubber. This allows for the creation of a positive pressure zone or direct ducting to equipment.
The Air Marshal delivers enough filtration power to change the air in a 800 sq. ft. room with 8.5' ceiling 4 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
The variable speed control allows you to fine tune motor speed and noise.
The carring handle and 2 inch industrial casters make the AIr Marshal one man portable.
A pressure light indicator shows when the HEPA filter needs changing.
|
|
|
Dimensions: 18.5" (h) x 25"(w) X 15"(d)
Shipping Weight: 80 LBS.
Operating Weight: 65 lbs.
# of units per pallet: 1
Filtration System: 24 lbs. of carbon, medical-grade HEPA filter, pre-filter
Carbon w/canister: 24 lbs 2.5" Depth
HEPA: Medical-grade HEPA filter
CFM: 450 Delivered
Speed: Variable
|
Voltage: 115/60Hz or 230/60Hz Please specify when ordering
Amps: 1.76 / .88
Cord length: 8 ft.
Decibel Level: 55 - 75 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: Moveable, on 2" industrial casters
Pressure Gauge /Light Indicator: Yes
Filter Access: Rear latch
Options: N/A
Colors: Black with yellow and black safety stripe
Motor Details: Motorized impeller in a housing
|
|
For Airborne Chemical and Particle Control
The Air Marshal 2000 delivers up to 450 CFM (Cubic Feet per Minute).
The Air Marshal 2000 contains a 2 inch deep HEPA flter and a 24 lb. 2.5 inch deep carbon filter. A pre-filter captures larger particles.
A hose can be connected to the 12" exhaust flange to create a negative air pressure zone.
A 12" intake flange may be ordered with the Air Scrubber. This allows for the creation of a positive pressure zone or direct ducting to equipment.
The Air Marshal delivers enough filtration power to change the air in a 800 sq. ft. room with 8.5' ceiling 4 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
The carring handle and 2 inch industrial casters make the AIr Marshal one man portable.
A pressure light indicator shows when the HEPA filter needs changing.
|
|
|
Dimensions: 18.5" (h) x 25"(w) X 15"(d)
Shipping Weight: 87 LBS.
Operating Weight: 72 lbs.
# of units per pallet: 1
Filtration System: 28 lbs. of carbon, electrostatic particle filter, pre-filter
Carbon w/canister: 28 lbs 3.0" Depth
HEPA: N/A
CFM: 450 Delivered
Speed: Variable
|
Voltage: 115/60Hz or 230/60Hz Please specify when ordering
Amps: 1.76 / .88
Cord length: 8 ft.
Decibel Level: 55 - 75 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: Moveable, on 2" industrial casters
Pressure Gauge /Light Indicator: Yes
Filter Access: Rear latch
Options: N/A
Colors: Black with yellow and black safety stripe
Motor Details: Motorized impeller in a housing
|
|
For Airborne Chemical and Particle Control
The Air Marshal 3000 delivers up to 450 CFM (Cubic Feet per Minute).
The Air Marshal 3000 contains an electrostatic particle filter and a 28 lb. 3.0 inch deep carbon filter. A pre-filter captures larger particles.
A hose can be connected to the 12" exhaust flange to create a negative air pressure zone.
A 12" intake flange may be ordered with the Air Scrubber. This allows for the creation of a positive pressure zone or direct ducting to equipment.
The Air Marshal delivers enough filtration power to change the air in a 800 sq. ft. room with 8.5' ceiling 4 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
The carring handle and 2 inch industrial casters make the AIr Marshal one man portable.
|
|
|
Dimensions: 18.5" (h) x 25"(w) X 15"(d)
Shipping Weight: 91 LBS.
Operating Weight: 76 lbs.
# of units per pallet: 1
Filtration System: 36 lbs. of carbon, electrostatic particle filter, pre-filter
Carbon w/canister: 36 lbs 3.5" Depth
HEPA: N/A
CFM: 450 Delivered
Speed: Variable
|
Voltage: 115/60Hz or 230/60Hz Please specify when ordering
Amps: 1.76 / .88
Cord length: 8 ft.
Decibel Level: 55 - 75 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: Moveable, on 2" industrial casters
Pressure Gauge /Light Indicator: Yes
Filter Access: Rear latch
Options: N/A
Colors: Black with yellow and black safety stripe
Motor Details: Motorized impeller in a housing
|
|
For Serious Airborne Chemical Control and Particles
The Air Marshal 4000 delivers up to 450 CFM (Cubic Feet per Minute).
The Air Marshal 4000 contains an electrostatic particle filter and a 36 lb. 3.50 inch deep carbon filter. A pre-filter captures larger particles.
A hose can be connected to the 12" exhaust flange to create a negative air pressure zone.
A 12" intake flange may be ordered with the Air Scrubber. This allows for the creation of a positive pressure zone or direct ducting to equipment.
The Air Marshal delivers enough filtration power to change the air in a 800 sq. ft. room with 8.5' ceiling 4 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
The carring handle and 2 inch industrial casters make the AIr Marshal one man portable. |